INSTANT CALL BACK

SENDING INQUIRY IN 1 MIN,
GETTING REPLY IN 2 HOURS.

Type Selection

Bollards should be selected and arranged according to local regulations or recognized design standards. The design process should consider:

  • Mooring patterns
  • Changes in draft due to loading and discharge
  • Wind and current forces
  • Sell, wave and tidal forces
  • Mooring line types, sizes and angles
  • Ice forces

CAPACITY SELECTION

Mooring points loads for general cargo vessels and bulk carries
Ship displacement (ton) Mooring point load (ton)
20,000 up to and including 50,000 80
Above 50,000 up to and including 100,000 100
Above 100,000 up to and including 200,000 150
Above 200,000 200

MOORING ANGLES

The height of the mooring points should be such that vertical angles of the mooring lines will be

as small as practicable not greater than 25°, GLEN mooring bollards are designed with a

recommend max. Angle 45°. However lines can be taken to 60°without danger of slippage.

See More

News

24 October 2017
KORMARINE 2017 held from October 24th to 27th,2017 in Busan,Korea

KORMARINE 2017 is the top trade exhibition in the Asia Pacific region. The Asian market is the most important target for those who want to expand their world business.

13 November 2017
The 20th Middle East (Abu Dhabi) International Petroleum Products Exhibition (ADIPEC 2017)

The 20th Middle East (Abu Dhabi) International Petroleum Products Exhibition (ADIPEC 2017) will be held from November 13 to November 16, 2017 at the United Arab Emirates - Abu Dhabi National Exhibition Center!

Useful Materials

  • 30Ton tricon type drawing
  • design calculation for circle head bollard